Hot Water And Superheated Water Boilers - Liquid & Gas Fired Systems|
Three Pass Cylindrical Back Furnaced Type
Material used to manufacture Water Boilers with back furnace;
Shell, back-furnace and furnace: Boiler shell sheet in norm of DIN 17155 (Furnace can be produced straight, partial corrugated, full corrugated according to the pressure)
Fire tubes: Quality of St35. 8 in norm of DIN 2448 stain seamless boiler pipe.
Insulation: insulted with glass wool with density of 18kg/m2 and 8 cm thickness than covered with galvanized or aluminum sheet.
Manufacturing and test periods of the boiler is under observation of the company Bureau Veritas and a Class Document (Project, Material, Welding and Welder approval, x-ray and normalization furnace control) which is the base of the CE document and hydrostatic test document are taken. (Every finished boiler in our factory is hydrostatically tested under a 1.5 times bigger pressure then the operational pressure.)
After the manufacturing is finished all the necessary armature connections can be done in our factory or at the site to get ready for operation.
· Stable form
· Heating capacity of 10.000.000 kcal/h
· Efficiency up to %90
· Water covered fire tubes
· Back furnace with water tubes instead of rear reversing chamber
· Additional heating surface with back furnace
· Low funnel gas temperature
· Longer flame length due to special design
· Addition of economizer at the end of the funnel gas exit and up to %95 efficiency with this upgrade
Hot Water And Superheated Water Boilers - General Information
While our comfort standards are increasing we are paying more and more attention to equipments' properties and their quality. At buildings where we live, at hotels where we stay, at shopping centers, in cinemas, at hospitals and at many places else we look for standards to feel better and comfortable. One of the most important standard is that the air is at the optimum temperature and quality.
From this point it is a must that these parameters have to be considered and applied to answer the certain standards.
No mater which heating system is used to maintain the necessary temperature there is always need for a hot water boiler. Hot water boilers are the heart of the heating system and it should be chosen suitable for its usage purpose after careful calculations.
Chosen system should maintain the desirable comfort standards and at the same time it should be economically beneficial and have a long lifetime. The fuel prices are increasing day by day, therefore the quality and the efficiency of the bought equipment gaining importance.
TETA has experience of more then 30 years about heating applications to improve the comfort standard and production of hot and super-heated water boilers for specific energy need of various process.
Efficiency of our boilers, decrease of the operational cost, long lifetimes, automation systems to minimize the risks, easy maintenance and repair possibilities and funnel gas values which suit the air quality protection regulations makes our customers smile.
TETA is producing hot water and super-heated water boilers for more then 30 years. Super-heated and hot water boilers with efficiencies up to %90 and boilers with 10.000.000 kcal/h capacity at one unit and with necessary pressure at the workshop can be designed and produced.
Beside to standard production our firm is capable to produce special design boilers according to our customer's boiler room layouts.
During design and manufacturing stages TETA is working according to TSE 497 or TSE 377. Additionally, depending on the project, design and production suitable to international standard like AD Merkblatt, TRD, DIN can be done.